[lameXpert]

Szerkesztette: lameXpert 2004. 04. 09. 17:48 -kor

[Dr. Evil]

Ez up.
Érdekes, h. pont az ilyen értelmes témák szoktak elsikkadni...

lameX, én béna vagyok, és nem találom, pedig nemrég még itten volt a fejembe ni... szóval a tavaly decemberben indított AGP 1.5V/3.3V témát nem tudnád felupolni?

[Renwick]

Megvan.

üdv

R.

[Csybe]

nahát! "még ilyet"

[Socket]

Jobb lenne ha az lenne a cím, hogy "Hogyan kösd rá a videókártyád a tv-re"

[Piftuka]

idézet:

---

Ezt írta Csybe:
nahát! "még ilyet" [/quote]

Még ilyet !

[lameXpert]

[lameXpert]

.

[Xero]

Ez egy okos topic!
És egy nagyon jó ábra! Csak annyit tennék hozzá hogy mostanában vettem új kábelezést hozzá! Nos aranyozott végû egész jó minõségû s-video kábellel viszem ki a jelet egy rca - s-video -> euro scart csatira ami megy a tv-be! Nos a kábel s-video - rca aranyozott! Mit mondjak régi kábelhez képest sokat javult a képminõség, és nem volt nagyon drága! Ha jól emlékszem átalakítóval együtt 1700 pénz!
Jha még valmai.. sokan keresnek ilyen cuccokat szgép. boltban! Nos már tudom hogy a legjobb/legolcsóbb cuccokat eldugott kis híradástechnikai boltokbna kell keresgélni!
És hidjétek el megéri rákötni okosan a tv-re a kedvenc gépünket! Telejsen más élmény azért a házimozi a TV-n ágyból nézve!

Tényleg jó topic bocs hogy belegányoltam!

Üdv

PS: Ha software-beli segítség kell és netántán nvidia alapú kártyád van akkor látogass el a "TV-out/TV kimenet problémák topicja. Nyugodtan lehet kérdezni. " címû topicba. Itt írtam pár sort hátha hasznos lesz.

[Socket]

idézet:

---

Ezt írta Xero:
Ez egy okos topic!
És egy nagyon jó ábra! Csak annyit tennék hozzá hogy mostanában vettem új kábelezést hozzá! Nos aranyozott végû egész jó minõségû s-video kábellel viszem ki a jelet egy rca - s-video -> euro scart csatira ami megy a tv-be! Nos a kábel s-video - rca aranyozott! Mit mondjak régi kábelhez képest sokat javult a képminõség, és nem volt nagyon drága! Ha jól emlékszem átalakítóval együtt 1700 pénz!
Jha még valmai.. sokan keresnek ilyen cuccokat szgép. boltban! Nos már tudom hogy a legjobb/legolcsóbb cuccokat eldugott kis híradástechnikai boltokbna kell keresgélni!
És hidjétek el megéri rákötni okosan a tv-re a kedvenc gépünket! Telejsen más élmény azért a házimozi a TV-n ágyból nézve!

Tényleg jó topic bocs hogy belegányoltam!

Üdv

PS: Ha software-beli segítség kell és netántán nvidia alapú kártyád van akkor látogass el a "TV-out/TV kimenet problémák topicja. Nyugodtan lehet kérdezni. " címû topicba. Itt írtam pár sort hátha hasznos lesz. [/quote]
Felesleges volt felhozni... bár...

[lameXpert]

[url="http://"https://www.hwsw.hu/perl/ultimatebb.cgi?ubb=get_topic&f=17&t=005305"] [/url]

[szabinar]

idézet:

---

Ezt írta Socket370:

Felesleges volt felhozni... bár...[/quote]

...nem erted a lenyeget ...

[Hasse]

Idézet: Ezt írta Socket370:

Felesleges volt felhozni... bár...

Nem teljesen, a kép alatti linket jó lenne átmenteni a te topikodba:
Connect your PC to your TV

Szerkesztette: Hasse 2004. 04. 02. 19:11 -kor

[Socket]

idézet:

---

Ezt írta Hasse:


Nem teljesen, a kép alatti linket jó lenne átmenteni a te topikodba:
[url="http://"http://www.madshrimps.be/?action=gethowto&howtoID=37"]Connect your PC to your TV[/url][/quote]

Van benne valami.
Átrakom.

[ 2003. november 24.: Socket370 szerkesztette a hozzászólást ]

[lameXpert]

[url="http://"http://www.giga-byte.com/MotherBoard/FileList/NewTech/tech_6_channel_audio.htm"] [/url]

[lameXpert]

idézet:

---

http://store1.yimg.c...re_1770_1365934

There are many computers (such as IBM ThinkPads, Dell, Compaq, Toshiba, etc.) that have the ATI, SAVAGE, nVIDIA and other graphics cards that output S-Video.

Our S-Video adapters allow you to connect to your regular TV and pass on the color with the highest resolution. The S-Video jack on your graphics card may have seven or four little holes and a rectangular slot or "key". Unlike other adapters, our 4-pin adapters will fit both the 7-pin jack and the 4-pin S-Video jacks.

Computer manufacturers have not standardized on what jack to use - the 7 or 4 pin jack, but our adapters are cross-brand and are PC/MAC compatible and will fit either the 7-pin or 4-pin jack.

The following procedures are similar to what you may have to do in order view your DVDs on your regular TV.

Quick Summary under XP: In order to be able to see the movie playing on your TV you have to select the TV in the "Device settings". The movie will not play on both the laptop's screen and the TV under dual or clone view. Here's what you have to do under Win XP: Go to Start; Control Panel; Appearance and Themes; Display; Settings; Advanced; select the "tab" for your Graphics card; select "Device Settings"; select TV. For further details read below.

Before you start, change the display settings to 800 x 600; you need to do this since most TVs will not support higher resolution settings - this is ok, however, since you do not need higher resolution to enjoy your DVDs or to view your monitor's display on your TV. Read below about TV/VGA resolution comparisons. Also, make sure all of the hardware is connected before turning on the computer; you may have trouble getting the video card to recognize the TV as the second monitor - the option on some Dells is to change to "Clone" in Nview. But "Clone" is grayed out unless you have the RCA connector on the far end of the "S to RCA" cable, terminated in a VCR or TV.

1. Connect the "S-Video to RCA" cable or the "Pro S-Video to 3 RCA" cable to the "S-video out" of the computer and to the "video in" (yellow RCA jack) on the TV. NOTE: This step must be performed before you start up the computer. Make sure that your TV is set to "recognize" the RCA/yellow video-in jack; you may have to play with the "aux 1", "aux 2", or "line-in" selections on the TV or the TV's remote control. The S-Video jack on your computer may be a 4-pin or 7-pin jack that is usually on the back of the computer, as in the "TV-out" connector (# 2) on this diagram of the IBM ThinkPad T2X.

We will first describe the procedures for machines running Windows XP:

- Click on Start, Control Panel.

- Click on Display

- Click on Settings

- Slide the "Screen resolution" area slider bar toward Less until the setting reads 800 x 600. OK, you may not like how your screen looks at this setting after usig high-res settings, but you'll certainly enjoy your DVD on your TV!!! You can always change the res back when not playing DVDs.

- Click Apply

- Press FN and F5 simultaneously four times. The "FN" key is a short-cut key on some laptop keyboards. Note, this procedure is used with computers that have the nVIDIA G Force 4 card; your card may be different, but the idea is to select the TV-out function from the display settings of Win XP. It's not that complicated.

- Start playing your movie or presentation.

- There may be additional adjustments that may be required. If the TV display is shifted to the right with a black vertical bar on the left side you will have to perform additional settings. Joshua T. has the following suggestions: "The computer runs Windows XP Pro and has a "Radeon IGP 345M", which I believe is made by ATI. Under 'Display Properties', 'Settings', 'Advanced', 'Displays', click the "TV" button, then 'Adjustments' tab. There you will find options to change the vertical/horizontal size and position. Once you have switched over to use the tv you can simply adjust these settings while you watch the display on the television to get it looking the way you like."

Procedures for Microsoft Windows 98, Microsoft Windows Me, or Microsoft Windows 2000:

NOTE: To use the TV as the primary display with the dual display function, you need to enable the TV setting every time you start your computer.

2. Click Start, point to Settings, select Control Panel, and choose Display.

2.1 Under the Display Properties window, ensure that the color depth is set to High Color (16bit)

2.2 Click Advanced Properties under the Settings tab; this brings up the ATI or SAVAGE video card features.

2.3 Click on the Display tab; this gives you the output options.

2.4. If you have an ATI video card the "Displays" tab gives you the output options. If the TV is detected, it shows the power button on. The button next to that gives you adjustments for the picture, kind of like those to center the view on your monitor. On the bottom are some blue buttons.

2.5 Make the TV the primary display and the monitor secondary. The default settings on the rest of the adjustments may not need to be changed.

2.6 If you have the SAVAGE graphics card you need to do the following on the display tab - go to the settings tab. There's a drop down menu with 2 monitors, select the first one. Click on the advanced button. There's a tab titled "s3 duo vue". Choose that tab, and click on the tv option. If you do not follow these steps you'll get a message from the savage image card control stating "You must activate the tv first." NOTE: To use the TV as the primary display with the dual display function, you need to enable the settings every time you start your computer. Also, the IBM ThinkPad T20, T21, T22 and T23 systems do not support dual display running Microsoft Windows 2000 unless there's a 2nd PCI card installed on the ThinkPad Dock.

3. Click OK to close window.

3.1 Click OK to apply the changes

NOTE: The S-Video to RCA Adapter must be attached to the unit or the TV option will be grayed out.

4. When the DVD player was showing the movie, the TV will display it, but the monitor window will be black unless you have dual display capability on your computer.

5. Your TV may just happen to be able to support the 1024 x 768 pixel resolution that the computer may be set to, however, if you lower the resolution to 800 x 600 the movie will probably play much smoother without any noticeable drop in picture quality.

6. Video Formats. You need to make sure that the video format selected on your computer is the same as the video format required for your television. There are some computers that are sold in the USA with PAL-B as the default video format; you need to change it to NTSC-M for TVs in North and South America. There are basically three television video formats, NTSC, PAL and SECAM. NTSC is used in Canada, Japan (NTSC-J), USA, Mexico, Central and South America. PAL is used in most European Countries, Australia and New Zealand. SECAM is primarily used in France and the old Soviet republics.[/quote]

[lameXpert]

[quote]

Some motherboards come with an ALC650 Codec which supports high quality 5.1 Channel Audio effect, bringing you a brand new audio experience. On the strength of the innovative design of ALC650, you're able to use a standard line-jack for surround audio output without connecting any external module. To apply this function, you have to install the audio driver in the Bonus Pack CD as well as an audio application supporting 5.1 Channel. The picture represents the standard location of all speakers in the 5.1 Channel sound track. Please connect the plug of your front speakers to the green “Speaker out” port, rear speakers’ plug to the blue “Line in” port and both of the center and subwoofer speakers to the red “MIC in” port. [/img]

[lameXpert]

[yeahsp]

egy egyszerû kapcsolás, amivel magának is csinálhat az ember egy svideo-composite-svideo adaptert (nekem oda-vissza mûködött korrektül)

link

[Repiv]

bocs elõre is ha nem 100% kapcsolódik a topic-hoz..

Azt mondja meg nekem valaki ha összekötöm a hangkarimat az erõsítõmmel akkor gerjed vagy mi, hangos búgó hang. Az erõsitõbe bevan kötve tv, videó, mûholdvevõ. Ha ezeket kihúzom az erõsítõbõl akkor megszünik a bugás. Illetve aztvettem még észre hogyha pl csak a videót hagyom bedugva és a videóból kihúzom a 75ohmos antennadugót akkor is megszünik a búgó hang...
a fenti példáknál minden esetben bevan dugva a hangkártya.

ez mitõl van???
nemtaláltam ellenszert a dologra 

a hangkártya audgy2
az erõsitõ technics


köszi elõre is

Szerkesztette: Repiv 2004. 04. 03. 13:32 -kor