Működő Abit AB9 Pro teljes cikk
itt
Finally I've made it! It was not simple, but now i'm very happy! wink.gif
!!! make sure you do read all the steps before do anything (its better if u print this guide) !!!
The method:
You must need the following stuff:
- 2 IDE HDD
- Windows XP (32bit) install disk
- VmWare 5.3 software
- Daemon Tools
- JAS 10.4.8 with PPF1-2 ISO image
- driver for AUDIO/LAN/VGA
- modded VGA BIOS for the NVidia 7950GT 512MB
*method here:
http://www.macvidia....mp;topic=1082.0
- bootable pendrive
- nvflash or nibitor software.
- backup PCI VGA, if anything goes wrong under the VGA BIOS modding
!!! First of all: you are warned, do it at your own risk !!!
1. Step: modding your VGA
READ CAREFULLY nvflash or nibitor software's USER MANUAL!!!
Boot your PC from the pendrive and read your VGA ROM with nvflash or nibitor.
Backup your default ROM
Mod your ROM (or if you're not sure what are U doing send your original ROM to "gotoh" !BiG RESPECT to you gotoh!
(Modded rom dont caus any changes under windows / linux read more: "http://www.macvidia.com/index.php?option=com_smf&Itemid=67&topic=1082.0"
If u got the modded ROM put it into your VGA!
OK You've got a modded VGA!. install the host OS
2. Step: Go to BIOS, under the "Integrated peripherials" menu change JMicron controller to IDE mode.
Install Windows XP to your 1st IDE HDD and install VmWare.
If you sucsessfully installed WindowsXP/VmWare, shut down ur pc, and connect the 2nd IDE HDD.
*I've used 250GB SAMSUNG HDD, but the OSX recognize "only" 128Gb.. not important
Boot your Windows XP and start VmWare.
Create a new virtual machine (Other X64 OS)
If its done, go to and edit your virtual machine setting.
Remove the VmWare disk, and add a new disk
!IMPORTANT!!IMPORTANT!!IMPORTANT!
choose new disk/Independent/Persistent disk!
!IMPORTANT!!IMPORTANT!!IMPORTANT!
Set up the VmWare CDROM to Daemon Tools virtual CD-ROM, NOT DIRECTLY THE .ISO IMAGE !
3. Step: Install JAS OSX86 iso
Mount your iso, and start the VmWare virtual machine.
Press ESC, choose BOOT from CD-ROM.
When the countdown is appeared press ENTER immedialtely.
The boot process will start.
When the installer started, choose language, NEXT,
Press Utility menu (top of the screen) and choose Disk Management / Disk Util (srry, i don't remember the exact name)
The point is: Create a new partition for osx.
When done, close it and select the new partition. Press NEXT.
Choose ONLY the Intel JAS 10.4.8 extension and press NEXT again.
The install process will start.
20-30 minutes later, install process will complete. Press reboot.
DO NOT ALLOW to reboot the virtual machine. After the OSX shutdown process ended, power down
the virtual machine.
Shut down your REAL PC. and disconnect your 1st (Windows XP HDD)
Start your ReAL PC, go to your BIOS, under the "Integrated peripherials" menu,
change JMicron controller from IDE mode to AHCI mode!
If everything goes well, your MAC OSX86 will starting up.
If not, the boot process hang up at the grey apple screen
don't panic, reset your PC (for me 2-3 times) and OSX will start up.
4. Step: Install VGA driver.
Download the driver: from macvidia.com
Release 006 (no IOProbeScore).zip and NVinject_permissions.command.zip
Extract both files, and copy the NVInject.kext file into your /System/Library/Extensions folder.
*Before this step, click the Extensions folder/Right Click and click "Get Info" and change permissions into
read and write mode for you.
After you copied the .kext file, run the NVinject_permissions.command
Reboot.
If everything good, you got high resolution, and millions of colour.
graceful... wink.gif
5. Step: Install AUDiO driver
Simply extract, and install the following file: ALC882_AppleHDA_v0[1].4b.mpkg.zip
Reboot.
If everything well, you've got sound.
*i've tested only stereo sound
graceful... wink.gif
6. Step: The LAN DRIVERS...
This is problematic,
i used this file: RTL1xxx_1.02.pkg.zip extract and run the installer.
Reboot. The OS recognize my card, but NO IP address.
Check you've got Rtl1000.kext file in your /System/Library/Extensions folder.
Open terminal, and type in your /System/Library/Extensions folder:
sudo kextload -t RealtekR1000.kext
sudo kextcache -k /System/Library/Extensions
Reboot
If everything right, you got both LAN adapter, and DHCP IP address.
AND FINALLY ENJOY! wink.gif
** I still got a problem. That I mentioned in the 3rd step, the OS won't boot first, just after
2-3 reset.
Don't know what cause this, I'm working on it...