[dekanov]

Sziasztok!
Haveromnak konfig alapját egy nf7 s2 teszi. Előtte win xp volt rajta már elég rég óta, így újratelepítettem a rendszert. Netről szedtem le az alaplapi drivereket, a saját driver cd nem található. A probléma a következő: a vga benne egy x1650 és hiába telepítem hozzá a catalyst drivert ( a legújabb is ment, meg kifejezetten x1650-hez keresett is ment, az ugyanúgy csak alapértelmezett képernyőként funkcionál, mint olyan a videokártyát nem is "látja". Elképzelhető, hogy ütközik valamelyik alaplapi driverrel?

Találkozott már valaki ehhez hasonló problémával?
A segítségeket előre is köszönöm!

[brd]

Meg lehet már oldani ATI-val (ha igen, milyen driverrel, és milyen kártya kell hozzá?), hogy ne rontsa el a képarányt, hanem tartsa meg mindenképpen? Pl. 1280x1024-es kijelzőn az 1024x768 ne legyen függőlegesen nyújtott. Vagy ezt még mindig csak notebookon "tudják"?

[Abu85]

Idézet: brd - Dátum: 2010. 10. 22. 20:04

Meg lehet már oldani ATI-val (ha igen, milyen driverrel, és milyen kártya kell hozzá?), hogy ne rontsa el a képarányt, hanem tartsa meg mindenképpen? Pl. 1280x1024-es kijelzőn az 1024x768 ne legyen függőlegesen nyújtott. Vagy ezt még mindig csak notebookon "tudják"?

Ezer éve van GPU-scaling.

[Chabi]

Idézet: brd - Dátum: 2010. 10. 22. 20:04

Meg lehet már oldani ATI-val (ha igen, milyen driverrel, és milyen kártya kell hozzá?), hogy ne rontsa el a képarányt, hanem tartsa meg mindenképpen? Pl. 1280x1024-es kijelzőn az 1024x768 ne legyen függőlegesen nyújtott. Vagy ezt még mindig csak notebookon "tudják"?

Olvasgasd:

GPU-68: Unable to set GPU Scaling option in ATI Catalyst™ Control Center
http://support.amd.c...GPUScaling.aspx

(D-sub csatival nem működik)

[Abu85]

Idézet: Chabi - Dátum: 2010. 10. 22. 21:35

Olvasgasd:

GPU-68: Unable to set GPU Scaling option in ATI Catalyst™ Control Center
http://support.amd.c...GPUScaling.aspx

(D-sub csatival nem működik)

Le kell venni 1024-re a felbontást és be lehet állítani.
D-Sub mellett tényleg nem működik, de a D-Sub-os monitorok nem is skáláznak.

Szerkesztette: Abu85 2010. 10. 22. 19:41 -kor

[Chabi]

Idézet: Abu85 - Dátum: 2010. 10. 22. 21:39

Le kell venni 1024-re a felbontást és be lehet állítani.
D-Sub mellett tényleg nem működik, de a D-Sub-os monitorok nem is skáláznak.

Az én monitoromon van D-sub és HDMI (DVI nincs). D-subbal természetesen nem de HDMI-vel skáláz

[Chabi]

WHQL 10.10 Catalyst
http://sites.amd.com.../downloads.aspx

Idézet

New
Introduction of AMD Catalyst™ Accelerated Parallel Processing
("APP") technology Edition
z There will now be two variants of the AMD Catalyst package available:
1. AMD Catalyst (comparable to prior versions in features and components) –
currently includes the Direct3D®, OpenGL®, display driver and AMD
Catalyst Control Center components
2. AMD Catalyst Accelerated Parallel Processing (“APP”) technology Edition –
AMD Catalyst plus the OpenCL driver
z Users can still obtain the individual AMD Catalyst components as well (which will
also include the OpenCL driver as well)

Video accleration for WMV HD® video content

z This release of AMD Catalyst provides video acceleration support for WMV HD®
(Microsoft video codec) under Windows 7
z Compatible with the ATI Radeon™ HD 5000 Series of products
Enhanced Dynamic Contrast video controls

z This release of AMD Catalyst enhances the Dynamic Contrast setting found in the
Catalyst Control Center by adding histogram based detection

Introduction of AMD HD3D Technology

Blu-ray 3D™ Support

z This release of AMD Catalyst enables Blu-ray 3D™ playback
z Requirements include Blu-ray 3D player software, 3D supported display and 3D
Stereoscopic glasses
z Compatible with the AMD Radeon HD 6800 Series

Stereo 3D Gaming Compatibility

z This release of AMD Catalyst enables Stereo 3D gaming via 3rd party Stereo 3D
Conversion Software from Dynamic Digital Depth (DDD™) and iZ3D™
z Requirements include 3D supported display and 3D Stereoscopic glasses
z Compatible with the ATI Radeon HD 5000 Series and AMD Radeon HD 6800 Series

*More information on AMD HD3D Technology, including Stereo 3D Conversion
Software and a list of supported displays, can be found at www.amd.com/hd3d

Catalyst™ Application Profiles

The following application profiles are available with this release of AMD Catalyst 10.10:

z Multiplayer Medal of Honor™ (DirectX® 9/DirectX® 10/DirectX® 11) CrossFire™
update
z Darksider™ (DirectX 9) performance and CrossFire anti-aliasing update
z NBA 2K11™ (DirectX 9) CrossFire update
z Stone Giant™ (DirectX 10/DirectX 11) CrossFire update
z Civilization V™ (DirectX 10/DirectX 11) tweak CrossFire update
z H.A.W.X.™ 2 (DirectX 10/DirectX 11) CrossFire update
z Formula 1™ (DirectX 10/DirectX 11) CrossFire update
z World of Warcraft™ (DirectX 11) version CrossFire update

Performance Improvements
The following performance improvements were observed with this release of AMD
Catalyst 10.10:

z Aliens vs. Predator™ DirectX 11 Benchmark
ƒ Performance increases up to 6% on ATI Radeon HD 5800 Series single and
CrossFire
ƒ Performance increases up to 5% on ATI Radeon HD 5700 Series single and
CrossFire
ƒ Performance increases up to 5% on ATI Radeon HD 5600 Series
ƒ Performance increases up to 5% on ATI Radeon HD 5500 Series
ƒ Performance increases up to 4% on ATI Radeon HD 5400 Series
z BattleForge™
ƒ Performance increases up to 6% on ATI Radeon HD 5800 Series single and
CrossFire configurations with anti-aliasing enabled
ƒ Performance increases up to 5% on ATI Radeon HD 5700 Series single and
CrossFire configurations with anti-aliasing enabled
z Crysis Warhead®
ƒ Performance increases up to 9% on Single ATI Radeon HD 5800 Series products
with anti-aliasing enabled
z Far Cry™ 2
ƒ Performance increases up to 7% on Single ATI Radeon HD 5800 Series products
z Metro 2033™
ƒ Performance increases up to 7% on ATI Radeon HD 5800 Series single and
CrossFire configurations
ƒ Performance increases up to 8% on ATI Radeon HD 5700 Series single and
CrossFire configurations
ƒ Performance increases up to 5% on ATI Radeon HD 5600 Series in DirectX 11
and 10 modes
ƒ Performance increases up to 5% on ATI Radeon HD 5500 Series in DirectX 11
and 10 modes
ƒ Performance increases up to 4% on ATI Radeon HD 5400 Series in DirectX 11
and 10 modes
z S.T.A.L.K.E.R.™ : Call of Pripyat Benchmark


ƒ Performance increases up to 7% on single ATI Radeon HD 5800 Series products
z Unigine™ Heaven
ƒ Performance increases up to 9% on ATI Radeon HD 5800 Series single and
CrossFire configurations with anti-aliasing enabled
ƒ Performance increases up to 8% on ATI Radeon HD 5700 Series single and
CrossFire configurations with anti-aliasing enabled
z World in Conflict™
ƒ Performance increases up to 9% on ATI Radeon HD 5600 Series
ƒ Performance increases up to 10% on ATI Radeon HD 5500 Series
Resolved Known Issues for All Windows Operating
Systems
This section provides information on resolved known issues in this release of the AMD
Catalyst software suite for Windows. These include:

z Catalyst Control Center page will now report the correct video memory type

Resolved Known Issues for the Windows 7 Operating
System

This section provides information on resolved known issues in this release of the AMD
Catalyst software suite for Windows 7. These include:

z Screen no longer becomes static after changing resolution in "Just Cause 2™" with
CrossFire enabled under Multi-GPU configuration
z Secondary (Slave) GPU and Memory Clock values will now increase when D3D
samples/games are running in fullscreen mode
z The maximum support mode will now be properly displayed when the CRT is
connected via the DP-to-VGA dongle
z Negative CrossFire scaling no longer experienced in "Need for Speed™: Shift 2" on
the ATI Radeon™ HD 5870 card
z Tearing corruption no longer visible in "Call of Duty®: Modern Warfare® 2" with
CrossFire enabled
z VGA display will now light up when hotplugged into the VGA port on a system
booted without any displays connected
z Changing the HDMI™ display output to 1776x1000 through the operating system
resolution setting no longer causes the refresh rate to default to 30Hz
z Frame drops no longer visible during WinDVD® Blu-ray playback with display
resolution set to 25x16
z Changes to HDMI display scaling are now retained after system reboot
z System no longer displays blue screen during HDMI audio driver upgrade if existing
version is not uninstalled prior to installation
z Unwanted desktop experience no longer visible while viewing Blu-ray content on
120 Hz displays
Resolved Known Issues for the Windows Vista Operating
System

This section provides information on resolved known issues in this release of the AMD
Catalyst software suite for Windows Vista. These include:

z Optimized and custom modes for 720p60, 1080p60 and 1080i30 are no longer
missing for specific DVI displays
z Display no longer turns black when rotated 90 or 270 degress with resolution set to
1080i30 and Aero® enabled

Known Issues Under All Windows Operating Systems

The following section provides a summary of open issues that may be experienced under
the Windows operating system in the latest version of AMD Catalyst. These include:

z Catalyst Control Center: Enable dialog reposition does not show on proper monitor
when system is configured with 4 displays
z Switching the preferred display in specific Eyefinity configurations may cause the
displays to become disabled
z During 4x1 Eyefinity configuration, the Catalyst Control Center "Desktops &
Displays" properties page may show black monitors instead of the actual desktop
background with display numbers on specific cards
z With Super Anti-Aliasing enabled, Crossfire logo might not appear during
"StarCraft® II" game launch on AMD Radeon HD 6800 Series
z System may stop responding while running OpenCL "Multi Device/Context"
Conformance test on GPU for some cards
z When using "Overdrive", clicking the "Default" button might not switch the GPU
and memory clocks back to their idle clock values once the memory clock value has
been changed on some cards
Known Issues Under the Windows 7 Operating System

The following section provides a summary of open issues that may be experienced under
the Windows 7 operating system in the latest version of AMD Catalyst. These include:

z Running fullscreen DirectX 9 applications/games after enabling Aero effects and
rebooting may cause the system to stop responding
z Task switching to desktop and then back into "Far Cry 2" DX10 game may result in
performance drop with CrossFire enabled under Multi-GPU configurations
z Primary display may blank out during "World in Conflict™: Soviet Assault"
DirectX10 gameplay with CrossFire and Dual Monitor enabled
z Drag and Drop transcoded H264i content may show de-interlacing lines
z Display may intermittently turn blank on launching "Enemy Territory™: Quake
Wars" or during gameplay under Multi-GPU configurations on some cards
z With CrossFire enabled, flickering may be observed in OpenGL games when refresh
rate is set to 100Hz or higher on some cards
z Desktop may dim after exiting "Mafia™ II" game on some cards
z Under multi-adapter configuration, various rotated displays in Eyefinity set up might
not be retained after reboot
z Mouse cursor may intermittently be corrupt/missing in one of the displays under
Eyefinity configuration while playing games/samples
z Tearing corruption may be visible in specific "StarCraft II" game campaigns at low
resolution settings (1024x768) on some cards
z "Stone Giant" DirectX 11 demo may fail in fullscreen mode with CrossFire enabled
under Multi-GPU configurations on some cards
z Task switching out of "Battlefield: Bad Company™ 2" and then back into the game
may cause CrossFire to become disabled
z Wrap-around corruption may be visible with 120 Hz panels during some resolution
changes in 120 Hz mode on AMD Radeon HD 6800 Series
z Switching from 32-bit to 16-bit colordepth during WMV media playback may cause
the video to go blank on some cards
z "Need for Speed: Shift" may intermittently display tearing corruption if races are
played back-to-back without exiting the game on AMD Radeon HD 6800 Series
z Enabling CrossFire in "Far Cry 2" DirectX 9 may result in low performance and
benchmark failing to complete on some cards
z "Tom Clancy's Endwar™" may stop responding during game cut scenes on som
cards
z Enabling in-game Anti-Aliasing and utilizing Edge-Detect filters may cause
smoother lines but blurry textures when compared to the Standard filter on some
cards
z Enabling anti-aliasing in "StarCraft® II: Wings of Liberty™" may cause outline
highlights to be rendered incorrectly on some cards
z Green texture corruption may be observed when resolution/video settings are
changed in "Metro 2033" game in DirectX 10 and 11 mode on some cards
z Rebooting a system with a CRT connected to the MiniDP port may cause all
resolutions except 640x480 to go missing
z Windows Media® Center application may stop responding or system may
intermittently fail while playing 1080p video in 2x2 & 4X1 Eyefinity mode
z Desktop line corruption may be observed after hotplugging the HDCP display o
some cards
Known Issues Under the Windows Vista Operating System

The following section provides a summary of open issues that may be experienced under
the Windows Vista operating system in the latest version of AMD Catalyst. These
include:

z Running fullscreen DirectX 9 applications/games after enabling Aero effects and
rebooting may cause the system to stop responding
z Corruption might be visible in "Doom™ 3" and "Quake™ 4" with ATI Radeon HD
4700 Series
z All but the primary display under Eyefinity configuation might become disabled
while changing the preferred display at lowest Bezel compensated resolution
z When "World of Warcraft" is launched via TriDef® 3D and hardware cursor is
enabled, the mouse cursor may flicker and disappear
z Performing bezel compensation on 3x2 Eyefinity configuration may cause the bezel
group (resolutions) to go missing
z "Left 4 Dead™ 2" may fail to launch and will generate an error message when
desktop is set to portrait mode on AMD Radeon HD 6800 Series
z Hot swapping a HDCP display panel with a non-HDCP display may cause display to
turn blank after resuming from sleep/hibernate during Blu-ray disc playback

ATI Catalyst™ 10.10a Performance Optimization Hotfix

Idézet

ATI Catalyst 10.10a Hotfix Features:
Performance optimizations for systems with an AMD Radeon™ HD 6870 and AMD Radeon HD 6850 series of graphics products installed
Support for the new Morphological Anti-Aliasing feature
Aliens versus Predator performance enhancements
Star Craft 2 performance enhancements
OpenGL performance enhancements – gains can be seen in Prey, Quake Wars: Enemy Territories, and Heaven v2.1

http://support.amd.c...010aHotfix.aspx

szerk.: Lehet vért hányni, hogy miért nem ezzekkel a driverekkel készültek a tesztek.

Szerkesztette: Chabi 2010. 10. 22. 20:46 -kor

[szabi]

Természetesen az amd szerver döglött.

Üdv
szabi

[Chabi]

Idézet: szabi - Dátum: 2010. 10. 22. 23:39

Természetesen az amd szerver döglött.

Üdv
szabi

Tökéeletesen megy. Mi a baj nálad ?

[Virus9AX]

Nálam is le van halva.

[Chabi]

Idézet: Virus9AX - Dátum: 2010. 10. 22. 23:49

Nálam is le van halva.

Az egész vagy csak a letöltés nem működik ?

Nekem megy.

Szerk.: a közvetlen linkek sem mennek nektek ?

https://a248.e.akama..._dd_ccc_enu.exe

https://a248.e.akama..._dd_ccc_enu.exe

https://a248.e.akama..._dd_ccc_enu.exe

Szerkesztette: Chabi 2010. 10. 22. 22:06 -kor

[szabi]

Nálam csak a főoldal jön be.
Driver oldal már nem.
Amit te linkeltél az is bejön, viszont onnan sem megy tovább.

SZERK: Most ok.
Mi ez az "AMD Catalyst™ Accelerated Parallel Processing (APP) Technology Edition"?

Üdv
szabi

Szerkesztette: szabi 2010. 10. 22. 22:10 -kor

[Chabi]

Idézet: szabi - Dátum: 2010. 10. 23. 00:07

Mi ez az "AMD Catalyst™ Accelerated Parallel Processing (APP) Technology Edition"?

Benne van az OpenCl driver, nem kell külön telepíteni.

[Virus9AX]

Egész oldal fehér volt és csak a bal felső sarokba volt egy nyelvválasztó box.
Most már viszont jó ismét.

[Chabi]

Idézet: Virus9AX - Dátum: 2010. 10. 23. 00:18

Egész oldal fehér volt és csak a bal felső sarokba volt egy nyelvválasztó box.
Most már viszont jó ismét.

[szabi]

Köszi.
Nem igazán hiszem, hogy ki tudom én azt használni.

Üdv
szabi

[Ironjesus]

Üdv nekem is felment a 10.10 de nem kért restartot és nem is találom ezt a texture filtering quality-t!
Esetleg vmi probléma lehet a driverrel? bár nem írt ki semmi hibát!
A segítséget előre is köszönöm!

[Virus9AX]

Idézet: Ironjesus - Dátum: 2010. 10. 23. 00:33

Üdv nekem is felment a 10.10 de nem kért restartot és nem is találom ezt a texture filtering quality-t!
Esetleg vmi probléma lehet a driverrel? bár nem írt ki semmi hibát!
A segítséget előre is köszönöm!

Nyugi én már a Catalyst AI opcióját se látom

[szabi]

Nálam kért restart-ot, catalyst A.I is megvan, de texture filtering quality-t én sem találok.
Lehet nem aktív az öreg kártyák esetén.

Viszont pozitív nem rendezte át a desktop-ot.

Üdv
szabi

[Frosty]

Jó ez a CAT 10.10. Egy kicsit buzis színvilágot csinál.

[img]Nem látszik screenshoton.[ /img]

Szerkesztette: Frosty 2010. 10. 23. 08:42 -kor